The LVM_GETCOLUMNWIDTH message retrieves the width of a column in report or list view. You can send this message explicitly or by using the ListView_GetColumnWidth macro.
LVM_GETCOLUMNWIDTH wParam = (WPARAM) (int) iCol; lParam = 0;
Returns the column width if successful or zero otherwise.
See also:
| file: /Techref/os/win/api/win32/mess/src/msg11_28.htm, 1KB, , updated: 2000/4/7 12:20, local time: 2012/5/24 19:19,
38.107.179.231:LOG IN |
| ©2012 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://www.piclist.com/tecHREF/os/win/api/win32/mess/src/msg11_28.htm"> LVM_GETCOLUMNWIDTH</A> |
| Did you find what you needed? |
|
Calculator 7-seg LED chars, port values, resistor color codes and common values, ohms law, wavelength / frequency, RMS and Peak, max value for x bits, etc... |
SX MASTERS: Eric Smith and Richard Ottosen's SERVID is an intellegent RS232 video terminal (4x20 character display) in one chip. See the write up here.. |
.