Language Pcl LJ1600.ASC

ORIENTATION COMMANDS


DEFINITION:
     
     The following command and example will detail the
     varied orientations available with the printer.
     
          Note:  The printer can not print more
                 than one orientation per page.
          
     The print direction command must be used when the text
     needs to be printed in the different directions on the
     same page. The following example will print various
     orientations on seperate pages.

ORIENTATION

          LEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT


     EcE                           Printer Reset
     
     Ec(1p20v0s3b4101T             Selects a proportional,
                                   20 point, upright, bold,
                                   CG Times font.
     
     Ec&l0O                        Selects portrait
                                   orientation.
     
     Portrait                      Will print "Portrait"
     
     Ec&l1O                        Selects landscape
                                   orientation.
     
     Landscape                     Will print "Landscape"
     
     Ec&l2O                        Selects reverse portrait
                                   orientation.
     
     Reverse Portrait              Will print "Reverse
                                   Portrait"
     
     Ec&l3O                        Selects reverse landscape
                                   orientation.
     
     Reverse Landscape             Will print "Reverse
                                   Landscape"
     
     EcE                           Printer Reset
     



            Copyright  Hewlett-Packard Co. 1993
   The information contained herein is subject to change
                      without notice.
   Hewlett-Packard shall not be liable for incidental or
  consequential damages in connection with the use of this
                         material.

PICList 2025 contributors: o List host: MIT, Site host massmind.org, Top posters @none found - Page Editors: James Newton, David Cary, and YOU! * Roman Black of Black Robotics donates from sales of Linistep stepper controller kits. * Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters. * Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated! * Contributors: Richard Seriani, Sr.

  .