Interrupt 0Ch Communications Controller (serial port) hdw. entry(0:0030h) (IRQ4) Serial Port 1 (com1) or modem in PCjr or Convertible
note IRQ 4 may be used by SDLC (synchronous data-link control) or
bisynchronous communications cards instead of a serial port.
(internal) stack fault (80286 protected-mode)
Generated on stack overflow/underflow. Note that the 80286 will shut
down in real mode if SP=1 before a push.
file: /Techref/int/0C.htm, 0KB, , updated: 1999/2/20 11:27, local time: 2025/5/7 03:14,
3.144.149.8:LOG IN
|
©2025 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://www.piclist.com/tecHREF/int/0C.htm"> int 0C</A> |
Did you find what you needed? |
![]() o List host: MIT, Site host massmind.org, Top posters @none found - Page Editors: James Newton, David Cary, and YOU! * Roman Black of Black Robotics donates from sales of Linistep stepper controller kits. * Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters. * Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated! * Contributors: Richard Seriani, Sr. |
The Backwoods Guide to Computer Lingo |
.