please dont rip this site

Heat Transfer

Heat exchanger surface area calculations

David Wells says:

My "Dave's Heat Transfer Rules of Thumbs" are:

For natural air circulation, figure around 10 Watts per square meter [of surface area] per degree C heat transfer, and for forced air, f gure up to about three times this value.

For water natural circulation, figure around 200 Watts per square meter per degree C heat transfer, and again for forced circulation, figure up to three times this.

For oil or organic materials such as non-oxygenated oils, like pure hydrocarbons, for non-boiling heat transfer, figure about one fifth the water values. For pure oxygenated materials for stuff like alcohols or glycols, figur e about one third of the water circulation values.

For boiling or condensation heat transfer of organics, figure around 1000 Watts per square meter per degree C. Assumes vapor is at atmospheric pressure.

For boiling heat transfer of polar oxygenated materials like water or methanol, figure about triple the value or about 3000 Watts per square meter per degree C. Again, assumes fluids condense or evaporate at near atmospheri c pressure.

For calculating the effect of the pressure of the boiler or condenser, figure the heat transfer will go as roughly the cube of the absolute pressure. So, for example, if your boiler operates at sub-atmospheric pressure of , say, 1/8 atmospheres, the heat transfer will be reduced by the cube root of one eigth, which is about 0.5. So the heat transfer rate is reduced by half.

file: /Techref/heatxfer.htm, 1KB, , updated: 2006/10/6 13:19, local time: 2024/7/15 10:04,

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF=""> Heat Transfer</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.

Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

  PICList 2024 contributors:
o List host: MIT, Site host, Top posters @none found
- Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.

Welcome to!