piclist 2017\09\11\223133a >
Thread: Help troubleshooting a JFET circuit.
www.piclist.com/techref/index.htm?key=help+troubleshooting
face picon face BY : Sean Breheny email (remove spam text)



Could you post a photo of the original problem so we could see if somehow
you are interpreting it differently than we would?

I just tried the physical circuit (I used a J310 because I don't have a
2N4860 and J310 seems very similar) and I can't get anything like the
voltages they describe by making any one resistor open or shorted,
regardless of whether I use a 10Mohm input impedance voltmeter or a 10G ohm
impedance voltmeter. If I open the source resistor and measure Vs, I get
about 3V with either the Rin=10Mohm meter or the Rin=10Gohm meter.


On Mon, Sep 11, 2017 at 9:04 PM, James Burkart <EraseMEjamesspamBeGonespamburkartstudios.com>
wrote:

{Quote hidden}

--
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
mailman.mit.edu/mailman/listinfo/piclist
.

<CAE8uMMrEctO=nuap6UsNsZGfKByoU=ty4P+gm64Cyh-aqHcA5Q@mail.gmail.com> quoted-printable

In reply to: <CAL271=20n=sGG_+M4JUzRFOvMCyyJt6sJZx9OZphc4zhxq85ew@mail.gmail.com>
See also: www.piclist.com/techref/index.htm?key=help+troubleshooting
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) Help troubleshooting a JFET circuit.

month overview.

new search...