CU-50 RTD resistance chart?
speff.....@TakeThisOuTinterlog.com email (remove spam text)
Quoting William Couture <gmail.com>:bcouture
Multiply numbers by 5.
Halve these numbers.
depending on whether it's 50R at 0 degrees C or at 25 degrees C.
There may be others based on 75F or something.
Copper RTDs are all over place in terms of the quoted resistance (and therefore the tempco) when you get down to the last decimal place or two, AFAIK there is no standard.
One of the main applications would be homemade with a bit of wire left over
from winding the motor, so annealing and exact composition would be questionable.
-- http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
In reply to: <CAGLXasdLJ+3vD3Usn0+weFoSQGY5ogTnpsECMd9DKHE-2nLDGg@mail.gmail.com>
See also: www.piclist.com/techref/index.htm?key=rtd+resistance+chart
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the