piclist 2008\07\17\005727a >
Thread: Connecting a TV aerial
www.piclist.com/techref/index.htm?key=connecting+aerial
face picon face BY : Jinx email (remove spam text)



I need to put up another aerial. The one in these pictures

http://home.clear.net.nz/pages/joecolquitt/aerial1.jpg

http://home.clear.net.nz/pages/joecolquitt/aerial2.jpg

I brought it from a previous house, and it's been stored under this
one unused for a while. I've forgotten how it was connected. Can't
see anywhere obvious that the cable connected to before

The elements marked with a red circle are insulated from the central
beam. Opposite elements of that group are connected by the criss-
crossing strips. All other elements are screwed to the centre beam

Do I assume correctly that co-ax shield would go to one criss-cross
and signal to the other ? Or shield to centre beam and signal to one
criss-cross ?

Looked around the web but wiring is all about the TV end

TIA

<052b01c8e7c9$44c71680$89aafea9@ivp1> 7bit

See also: www.piclist.com/techref/index.htm?key=connecting+aerial
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) Connecting a TV aerial

month overview.

new search...