OK to operate at the absolute max rating?
M. Adam Davis email (remove spam text)
Didn't we go through this with another previous thread just a month or
so ago? If I remember correctly you received many suggestions on how
to use transisters and other switching devices to drive high, low, and
high-z (high impedance, or high resistance).
Ah, here we are:
Also found in your email under the tag [EE] with the subject
"Tri-state pin with three functions"
Some apply only to driving a 2 pin bipolar LED, but some describe how
to accomplish what you're asking in this post. You should re-read the
entire thread carefully, there's enough design information in there
that afterwards you should be able to think through this and design
On 7/15/08, Tomás Ó hÉilidhe <lavabit.com> wrote: toe
EARTH DAY 2008
Tuesday April 22
Save Money * Save Oil * Save Lives * Save the Planet
In reply to: <487CBE06.email@example.com>
See also: www.piclist.com/techref/microchip/devices.htm?key=pic
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the