OK to operate at the absolute max rating?
Tomás Ó hÉilidheemail (remove spam text)
> Adding a single driver transistor per line at about $US0.01
> each in volume would overcome the problem. Add a few
> resistors and you have good design flexibility. Cost and
> size are minimal compared to other circuit requirements.
Can you suggest a good driver chip? Initially I used a ULN2003, but it
turned out to have too great a voltage drop inside it. Same situation
with the UDN2981.
seeking: method errors crc
In reply to: <3d5001c8e608$ca59aaa0$e701a8c0@y2k>
See also: www.piclist.com/techref/microchip/devices.htm?key=pic
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the