piclist 2008\07\09\144612a >
Thread: antistatic protection for PIC burner
face picon face BY : email (remove spam text)(Olin Lathrop)

Artie Jones wrote:
> The programmer only uses a few pins, basically the other 24 pins
> (PIC18F2550) will be floating,

On that part make sure that PGM is held low even though it is not connected
to the programmer.  I would just tie it to ground at the socket.  Also put a
100nF to 1uF ceramic bypass cap from Vdd to Vss right at the socket.

Embed Inc, Littleton Massachusetts, http://www.embedinc.com/products
(978) 742-9014.  Gold level PIC consultants since 2000.
<00d001c8e1f4$5b123990$0300a8c0@main> 7bit

See also: www.piclist.com/techref/microchip/devices.htm?key=pic
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) antistatic protection for PIC burner

month overview.

new search...