Repost: PV OptoIsolator / MOS Driver Info
Bob Axtell email (remove spam text)
Alan B. Pearce wrote:
>> My post of yesterday never showed up. Here it is again:
> It showed in my mail, 'cause I went looking for the device you quoted.
>> While its spec says "min 7VDC" of output, it actually
>> delivers quite a bit more; I needed a 220K load resistor to
>> speed up on/off times and to prevent overdriving my power
> What speed do you actually achieve, because the app-notes I found by them
> regarding these seemed to figure on quite long switching times, and they
> didn't seem to quote a different time for the ones with internal resistor.
And I was never able to make it go faster than about 100Hz as a result;
my 220K sped it up only a little.
But what I plan to do is to simply use this as a power supply; I will
beef up the supply with a low-leak
capacitor, then switch it at high speed with a fast optoisolator. HP
makes some fast components like
In reply to: <firstname.lastname@example.org>
See also: www.piclist.com/techref/index.htm?key=optoisolator+mos
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the