piclist 2005\08\18\150408a >
Thread: Hardware DO instruction on ds30F
picon face BY : John Nall email (remove spam text)

Olin Lathrop wrote:

> > Keep in mind that there are only two DO loop nesting levels in the
> hardware.
> Unless you want to swap the hardware state in software (which gets
> messy),
> you have to think about allocating the levels.  In practise this isn't
> much
> of an issue, but you do have to think about it.

Yes, I can see where it could be a problem.  Certainly in theory, if not
in practice.  Thanks for the heads up.  I'll make notes on such things
as I go along.  Might be enough "gotcha's" there to justify a revised
version of LINT.  :-)


<4304DB5E.70307@gmail.com> 7bit

In reply to: <000e01c5a423$a90a43c0$780010ac@radianse.com>
See also: www.piclist.com/techref/microchip/devices.htm?key=pic
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) Hardware DO instruction on ds30F

month overview.

new search...