piclist 2004\07\05\040825a >
Thread: Driving ATtiny11 with 9v battery
picon face BY : Michael Rigby-Jones email (remove spam text)

>-----Original Message-----
>From: William Chops Westfield [spamwestfwKILLspamspamMAC.COM]
>Sent: 02 July 2004 22:08
>Subject: Re: [AVR:] Driving ATtiny11 with 9v battery
>On Jul 2, 2004, at 7:52 AM, Martin Klingensmith wrote:
>>> 4.0 - 5.5    ATTiny11-6                    1.5v range
>oops.  i was obviously getting the AVRs confused with the
>PICs, which have the wide operating range on their "default"
>parts. Chalk up another advantage to PICs.

PIC's are typicaly only rated from around 4.0 to 5.5volts for the standard
part (actualy voltage varies with the part), and 2.0-5.5 for the low voltage
"LF" parts.  The maximum operating clock frequency is reduced significantly
at lower voltages as well.



This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
Any questions about Bookham's E-Mail service should be directed to

http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads


See also: www.piclist.com/techref/power/batterys.htm?key=battery
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) Driving ATtiny11 with 9v battery

month overview.

new search...