Driving ATtiny11 with 9v battery
David VanHorn email (remove spam text)
>Neither circuit is good for a micropower design that may have a relatively
>wide supply current range. A micropower linear or switched regulator is the only decent solution in this case.
I use as zener shunt supply on the board I use to program my 2343s, because it's cheap, and easy.
I generally, will use a 7805-ish solution for most things, where I don't need efficiency.
Buck switchers where I do, and where the current demand is relatively high, and LDO linears where I need efficiency, and the current is low.
Engineering IS the art of compromise.
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
In reply to: <23075D38FE1C8144847DFAECA3565F2704E54A0F@pai-smx-01.europe .bkhm.net>
See also: www.piclist.com/techref/power/batterys.htm?key=battery
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the