piclist 2004\04\21\162056a >
Thread: ATmega162 programming...?AVRisp?
face BY : Doug Hewett email (remove spam text)

Please check that no applications that use the com port are open.

-----Original Message-----
From: pic microcontroller discussion list
[spam_OUTPICLIST@spam@spamMITVMA.MIT.EDU] On Behalf Of Kevin Olalde
Sent: Wednesday, April 21, 2004 1:07 PM
Subject: Re: [AVR:] ATmega162 programming...?AVRisp?

Well, I had a couple of minutes to try this out this morning, no joy.
Studio software kept complaining that:

Entering programming mode failed

Does anyone know if an external oscillator is required when trying to
use the
AVRISP on an ATmega162?  I triple checked all the connections between
the 10 pin
header and the chip.  The chip is on a solderless breadboard with a 10K
on RESET.  No other pins are connected (other than VCC and GND).


Carlos Marcano wrote:
> So maybe I will have to download the most recent version of the
{Quote hidden}

> from the net, not the stuff that came on the CD.
> Kevin

http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

This email, and any documents attached, may contain confidential and/or legally privileged information for the sole use of the intended recipient named above. If you have received this email in error, please notify the sender and delete this email. Any copying, distribution, or use of the contents is strictly prohibited.

http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

<F64E634D689B8C42AD4A37546C9CB7A02BD0EE@cancer.startrac.com> quoted-printable

See also: www.piclist.com/techref/microchip/devprogs.htm?key=programming
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) ATmega162 programming...?AVRisp?

month overview.

new search...