Reading EEPROM when lockbits are set ?
Reelf Monsees email (remove spam text)
we have to service a device containing a AT90S1200. Unfortunately, there is no documentation at all. The relevant information is
stored in the EEPROM of the controller, program-data doesn't matter for
us as we have write a new program anyway. As both lockbits are set, reading the EEPROM with a programmer is not
possible (or is it?). So we could write a program for the 90S1200
that transmits the data from the EEPROM trough one pin serially.
But there doesn't seem to be a way to erase and rewrite the program-
memory without erasing the EEPROM as well (or is there ?).
If anybody comes up with an idea, that would be great !
-- SyWiTec * Systeme für Wissenschaft und Technik
Bamberg & Monsees GbR
Steindamm 22 * D-28719 Bremen
Fon +49-421-646775 * Fax +49-421-646785
http://www.piclist.com hint: The PICList is archived three different
ways. See http://www.piclist.com/#archives for details.
See also: www.piclist.com/techref/mems.htm?key=eeprom
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the