piclist 2003\06\17\140414a >
Thread: Newbie in the block....
www.piclist.com/techref/index.htm?key=newbie+block
picon face BY : Douglas Wood email (remove spam text)



> Yes I find it interesting also, is this all that is
> need as far as hardware goes to program the chips you
> were talking about? If so I may give it a try after I
> get a bit more comfortable with pics.

Yes. That "dongle" and PonyProg is all that is required to program an AVR
from the parallel port.

Note that on some of the AVR processors, the in-system programming (ISP)
interface share pins with a UART. You may need to add a MUX to the design to
isolate the two functions. I can provide you with an example schematic if
you need.

Douglas Wood
Software Engineer
KILLspamdbwoodKILLspamspamspam_OUTkc.rr.com
ICQ#: 143841506

Home of the EPICIS Development System for the PIC
http://epicis.piclist.com

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics
<12a001c334fa$5352a7a0$6601a8c0@kc.rr.com> 7bit

See also: www.piclist.com/techref/index.htm?key=newbie+block
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) Newbie in the block....

month overview.

new search...