piclist 2003\02\22\123021a >
Thread: Pin won't turn off properly
www.piclist.com/techref/ubicom/devices.htm?key=sx
picon face BY : Stephen email (remove spam text)



Assuming having a setb/clrb on a temp value which gets written to the
port takes too long, you could save a cycle by just writing predefined
states to the port.

On the SX at least, wrting values directly to the port is common way to
share multiple VPs on the same port as well, while still possibly
maintaining jitter free operation.

Cheers,
Stephen

{Original Message removed}
<000e01c2da97$db094590$6701a8c0@shollandathome> 7bit

In reply to: <3E5795D7.2AF9@ezy.net.au>
See also: www.piclist.com/techref/ubicom/devices.htm?key=sx
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) Pin won't turn off properly

month overview.

new search...