piclist 2003\02\20\210910a >
Thread: Differential Amplifiers
www.piclist.com/techref/index.htm?key=differential+amplifiers
flavicon
face BY : Ned Konz email (remove spam text)



On Thursday 20 February 2003 06:00 pm, Ian McLean wrote:
> Just 10kHz input in simulation.  In reality it would only be 5.  Is
> this where I am going wrong.  As Richard has suggested, am I
> reaching a slew-rate limit ?

The LM358 will swing its outputs from 0V to V+ - 1.5V. So you can
expect to see clipping at 3.5V if you have a 5V supply.

Its input common mode range has the same limits.

--
Ned Konz
http://bike-nomad.com
GPG key ID: BEEA7EFE

--
http://www.piclist.com hint: To leave the PICList
spam_OUTpiclist-unsubscribe-requestspam_OUTspamspammitvma.mit.edu>
<200302201806.36147@ned.bike-nomad.com> 7bit

In reply to: <000d01c2d94c$f3c8f310$0c00a8c0@deepthought>
See also: www.piclist.com/techref/index.htm?key=differential+amplifiers
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) Differential Amplifiers

month overview.

new search...