piclist 2003\02\18\141001a >
Thread: EAGLE Question
face BY : Ned Konz email (remove spam text)

On Friday 14 February 2003 01:52 am, Sean Alcorn - PIC Stuff wrote:
> Hi all,
> Has anybody tried to make a dual diode SOT-23 package in EAGLE?
> The ideal way to do it would be to have two "Gates" that are diode
> symbols in order to be able to place the two diodes anywhere on a
> schematic - however this is four connections to be made to 3 pads
> and EAGLE does not seem to allow this.
> The only other way is to draw the entire "double diode" as one
> symbol with 3 pins - however this seems restrictive when trying to
> place the component on a sheet. :-(

I drew one with two diode symbols and a single package that had 2 SMD
pads on top of each other.

However, the DRC flagged these pads as having clearance problems.

On the other hand, you could change the DRC rules to allow SMD pads
with the same signal to overlap (I think).

Ned Konz

http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.
<200302181108.49027@ned.bike-nomad.com> 7bit

In reply to: <0C1E55F5-4002-11D7-B88D-000393C2AB2C@sdalcorn.com>
See also: www.piclist.com/techref/pcbs.htm?key=eagle
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) EAGLE Question

month overview.

new search...