Pin won't turn off properly
G.Smith email (remove spam text)
On 17 Feb 2003, at 23:00, Jinx wrote:
> Attached pic is typical of the SX behaviour - the port pins simply
> will not reliably turn off when told to or, in this case, one actually
> turns off prematurely. As noted before (see OP for setup) it is not
> related to speed or pin terminations.
I did not spot any references to speed in the posts in the archive - have you
tried it with a 4MHz xtal?
The pcb recomendations include ground plane under the chip (guessing you
won't have that yet) but this would not matter at 4MHz.
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics
In reply to: <005901c2d66b$5dbe6a00$3cada7cb@joe>
See also: www.piclist.com/techref/ubicom/devices.htm?key=sx
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the