piclist 2002\12\15\115943a >
Thread: Making quality printed circuit boards
picon face BY : Spehro Pefhany email (remove spam text)

At 12:04 AM 12/15/02 -0500, you wrote:
>After many years of making printed circuit boards, I'm sharing my method
>to all that are interested.

Nice site, Rick.

Have you tried generating film directly by installing a Linotronic or
whatever (I use a "whatever", Scantext) driver in your computer and creating
a print file? Cost isn't much different and you skip the problems with
anisotropic scaling that some laser printers have. Transporting the file
used to be an issue if you didn't have a Zip drive, but these days it's
easy to burn a CD or FTP the file to your local SB.

Best regards,

Spehro Pefhany --"it's the network..."            "The Journey is the reward"
spamBeGonespeffspamspamKILLspaminterlog.com             Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog  Info for designers:  http://www.speff.com

http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.

In reply to: <3DFC0D3F.B5DE749F@vvalley.com>
See also: www.piclist.com/techref/pcbs.htm?key=circuit+board
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) Making quality printed circuit boards

month overview.

new search...