Comments wanted on PCB prototyping idea.
Spehro Pefhany email (remove spam text)
At 04:26 PM 12/9/02 -0500, you wrote:
>Exactly, I recently picked up a set of 50 assorted drills/rasps that had
>1/8" shanks to use in my regular drill press. I've only broken one and it
>was because I moved the PCB before I lifted the bit (safety glasses are a
>must). The set was ~$27 CDN from http://www.leevalley.com (no affiliation) item #
>"92W02.22" . They're based in Canada but I think they have a warehouse in
>the US and can ship internationally.
Thanks for posting the item number especially. I couldn't find it under
Hardware->Fasteners-> Drill bits, I should have looked under
Their web site has a ways to go, but they deal with online orders
Spehro Pefhany --"it's the network..." "The Journey is the reward"
interlog.com Info for manufacturers: speffhttp://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.com
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics
In reply to: <email@example.com m>
See also: www.piclist.com/techref/pcbs.htm?key=pcb
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the