220v Isolated transformer
Spehro Pefhany email (remove spam text)
At 10:39 PM 12/6/02 +0200, you wrote:
>I am aware that it can't deliver large currents
>just check if the idea will work.
>btw, if I use 12vac/1A secondary how much current I can draw ?
50mA, but the regulation will be twice as bad as with a
single transformer (eg. if the voltage drops 15% from OC
to full load on the transformer, it will drop almost double
that with two). So 25mA would be better from that pov.
Spehro Pefhany --"it's the network..." "The Journey is the reward"
interlog.com Info for manufacturers: speffhttp://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.com
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email mitvma.mit.edu with SET PICList DIGEST in the body listserv
In reply to: <NFBBLCOLGLCDHFHJMPBPKEDHDDAA.email@example.com>
See also: www.piclist.com/techref/power.htm?key=transformer
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the