piclist 2002\12\02\134710a >
Thread: ER mode PIC16F628
picon face BY : Spehro Pefhany email (remove spam text)

Hi, all:-

There does not seem to be any typical or otherwise figures on
clock frequency vs. DC bias resistor on this part. The datasheet
(DS40300B-page 98) refers to the "Electrical Specification"
section, which doesn't seem to have anything in it, only min/max
frequency numbers with no indication of what resistances would
be required to produce those frequencies.

Anyone have even one data point for this? Eg. with a 100K
resistor, I get XX MHz clock.

(There are also a couple of mistakes/omissions on the Pinout
description overview (page 11), none of which have made their
way to the errata yet.)

Best regards,

Spehro Pefhany --"it's the network..."            "The Journey is the reward"
spamspeffspaminterlog.com             Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog  Info for designers:  http://www.speff.com

http://www.piclist.com hint: To leave the PICList


In reply to: <000701c29a1d$2419e0c0$0100a8c0@main>
See also: www.piclist.com/techref/microchip/devices.htm?key=16F
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) ER mode PIC16F628

month overview.

new search...