Proper Serial I/O
Russell McMahon email (remove spam text)
> My UART routine at http://www.embedinc.com is fully interrupt driven and
> assembly constants to select the sizes of the input and output software
> FIFOs and the baud rate. The interface to the rest of the application is
> via the UART_PUT and UART_GET routines, which each transfer one byte.
> are also global flags that let you know when those routines won't block
> before you call them. And of course it does work with my build
Sounds excellent - but I couldn't see how to access it from the above link.
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics
See also: www.piclist.com/techref/microchip/ios.htm?key=serial
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the