piclist 2002\08\29\142605a >
Thread: question about 18F452
face BY : Mike Mansheim email (remove spam text)

> 1. Does anyone know if PicStart Plus with 2.3 firmware
> and MPLAB 5.3 will program the 18F452?

Don't know about the picstart, but I think you need MPLAB 5.62 to
recognize the F parts.  A "dot release" on 5.5 worked also, but that
seems unnecessary since 5.62 is available.  This is based on getting
a promate working, but I think you still need to have MPLAB aware of
the part.

> 2. Is it worth learning the 18F instruction set?

I mentioned this in another post a while ago, but you'll want to learn
enough to be aware of differences such as DECF now affects the carry
flag, but didn't on the 16 series - means you can't necessarily just
drop code in.

http://www.piclist.com hint: To leave the PICList


See also: www.piclist.com/techref/microchip/devices.htm?key=18F
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) question about 18F452

month overview.

new search...