piclist 2002\08\14\092351a >
Thread: MPLAB C18
face BY : Jim Ewald email (remove spam text)

You can find C18 users on the Microchip development tools webboard.
Point your browser at:


The fuses on the F18xxx MCU are set by including in-line assembler,
using the __Config directive (note there are 2 underscores in __Config).
There is a discussion on this topic up on the webboard. There is an
additional parameter to __Config in the PIC 18Fxxx series. It is defined

__Config  mem_addr, config_bits

The fuse addresses and bit maps are defined in the corresponding
P18Fxxx.inc file. For example, the OCS fuse settings might look like:


Sorry that I cannot help with your other questions. I'm still learning
how to use MPASM. C will have to wait for a while.


{Original Message removed}
<017901c24395$740025b0$2d02a8c0@JS42000> quoted-printable

In reply to: <05F909CD07724846ABB61C8CAE8C29260AA448@hyalhi.TEKSAN.COM>
See also: www.piclist.com/techref/microchip/languages.htm?key=mplab
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) MPLAB C18

month overview.

new search...