piclist 2002\08\10\212429a >
Thread: Fluke meter LCD problem
www.piclist.com/techref/lcds.htm?key=lcd
face picon face BY : Jinx email (remove spam text)



> The meter must be disassembled to the point where the LCD
> glass can be removed.  There are a couple rubbery components
> that are apparently the (non-metallic) conductors to the LCD
> glass.

Zebra strips

Strange that this should happen to a quality product like Flukes.
I've used reasonable but cheap meters for years and never
needed to clean those conductors. Same with my VCR remote,
which has a programming LCD on it, and gets absolutely gross
inside with, well, ever cleaned out a remote control ? Ick ick ick

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads


<001501c240d5$cbcb3860$3496a7cb@joe> 7bit

See also: www.piclist.com/techref/lcds.htm?key=lcd
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) Fluke meter LCD problem

month overview.

new search...