piclist 2002\08\03\062514a >
Thread: F877 I2C module
www.piclist.com/techref/i2cs.htm?key=i2c
face picon face BY : Jinx email (remove spam text)



Just curious - am I right in thinking that you can use either
7-bit or 10-bit addressing with the I2C module ? If so, does
that mean an EEPROM > 1k x 8 can't be accessed above
03FF ? I plan to use at least one 64k x 8 and need to know
if I'm wasting my time (at the moment) figuring out the I2C
module and should go back to bit-banging for large memories

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email TakeThisOuTlistservspamBeGonespammitvma.mit.edu with SET PICList DIGEST in the body


<000c01c23ad1$b91c2300$0295a7cb@joe> 7bit

See also: www.piclist.com/techref/i2cs.htm?key=i2c
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) F877 I2C module

month overview.

new search...