piclist 2002\07\06\062745a >
Thread: Light bars with words?
face picon face BY : Jinx email (remove spam text)

> Just found some 5mm wide (.2") self adhesive strip which might do?
> (I have not used it and dont know if the adhesive would survive the etch.)

I reckon that would do it. Paint the plastic before putting the foil down
(so you don't see the copper) and after etching use solvent to remove
the expose glue and paint. Hopefully the glue that holds the foil down
will last long enough to get the paint out. If it's contact glue like F2 it
should be OK, and it must be pretty tough to take soldering

http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

<000e01c224d7$73bc8b20$e994a7cb@joe> 7bit

See also: www.piclist.com/techref/index.htm?key=light+bars+with
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) Light bars with words?

month overview.

new search...