piclist 2002\07\06\052447a >
Thread: Light bars with words?
face BY : Geo email (remove spam text)

On 6 Jul 2002, at 12:09, Jinx wrote:

> Could you glue copper foil to 1mm acrylic (ie rigid base) then etch ?

Just found some 5mm wide (.2") self adhesive strip which might do?
(I have not used it and dont know if the adhesive would survive the etch.)

"Our copper strip is 5mm wide PCB-grade copper with a self-adhesive back
which can be attached to any clean, dry surface. Simply cut to length with
scissors, peel off the backing paper and press the strip into place. The adhesive
resists heat so the copper can be soldered. Use it for making simple "printed"
circuit boards, screening plastic enclosures, etc."

George Smith

http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads


In reply to: <007c01c22481$9cd9dd60$bd9ea7cb@joe>
See also: www.piclist.com/techref/index.htm?key=light+bars+with
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) Light bars with words?

month overview.

new search...