piclist 2002\06\30\024748a >
Thread: Reset PIC using Com Port
www.piclist.com/techref/microchip/ios.htm?key=port
flavicon
face BY : PSL email (remove spam text)



Thanks for the infor
----- Original Message -----
From: "Joe Farr" <TakeThisOuTjoe.farr@spam@spamTakeThisOuTKCSL.UK.COM>
To: <RemoveMEPICLISTspamMITVMA.MIT.EDU>
Sent: Sunday, June 30, 2002 2:41 PM
Subject: Re: [PIC]: Reset PIC using Com Port


Without a current limiting resistor on the base of the transistor, you stand
a good chance of damaging it or perhaps the gate on the MAX232. Try it with
a 1K resistor.


-----Original Message-----
From: PSL [STOPspampsln@spam@spamSTARHUB.NET.SG]
Sent: 30 June 2002 07:33
To: RemoveMEPICLIST.....spamMITVMA.MIT.EDU
Subject: Re: [PIC]: Reset PIC using Com Port


Yes
I have use the RTS PIN to reset it
RX and TX Pin are used.
Will it have any problem in power consumption?

--
http://www.piclist.com hint: To leave the PICList
piclist-unsubscribe-request.....spammitvma.mit.edu

--
http://www.piclist.com hint: To leave the PICList
piclist-unsubscribe-requestTakeThisOuTspammitvma.mit.edu


<003901c22001$d72b7200$43067dcb@a6w9j9> 7bit

See also: www.piclist.com/techref/microchip/ios.htm?key=port
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) Reset PIC using Com Port

month overview.

new search...