stepper "digital" knob viability
Erik Jacobs email (remove spam text)
> (re stepper motor for a digital knob thread)
> I've just been playing with a 12v unipolar "surplus"
> stepper from an old 5.25 disk drive. Connected it to
> the CRO and used a clothes peg for an accurate "knob".
Well, my questions are:
A) how small can one of these be (in comparison to a rotary encoder)?
B) how cheaply can one be had (in comparison to a rotary encoder)?
http://www.piclist.com hint: The PICList is archived three different
ways. See http://www.piclist.com/#archives for details.
In reply to: <3D1C394F.firstname.lastname@example.org>
See also: www.piclist.com/techref/io/steppers.htm?key=stepper
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the