877 I2C slave - does it work using the MSSP ?
Bob Blick email (remove spam text)
> Actually that's exactly what I recommend for learning how to program the
> MSSP. It, and a little common sense is what I've used to do a number of
> successful IIC projects. The Microchip code samples can be useless, or
> worse, but their data sheets are quite good.
Well, each to his own. I find it useful to look at code samples AND
read the data sheet. That's why I suggested looking at DS00734A.
> What part of the MSSP
> documentation don't you understand?
No, I'm not the one who needed help. You and I were both helping,
but I'm not interested in wearing the "expert hat". You can continue
wearing it, with my blessing.
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email mitvma.mit.edu with SET PICList DIGEST in the body listserv
In reply to: <001201c1cd15$870280a0$220bf6cd@main>
See also: www.piclist.com/techref/i2cs.htm?key=i2c
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the