EEPROM <-> PIC
wouter van ooijen & floortje hanneman email (remove spam text)
> Can we interface an EEPROM [specifically: 24LC256, 32Kbyte Flash EEPROM
> (I2C)] to the PIC in such a way that the firmware code can be written in
> EEPROM, from where the PIC can fetch it in packets and run it?
Simple answer: no.
But - depending on your application - you might be able to put a lot of data
in the eeprom, or maybe put some of the 'propgram' and interpret it by the
Wouter van Ooijen
Van Ooijen Technische Informatica: http://www.voti.nl
Jal compiler, Wisp programmer, WLoader bootloader, PICs kopen
http://www.piclist.com hint: The PICList is archived three different
ways. See http://www.piclist.com/#archives for details.
See also: www.piclist.com/techref/microchip/memory.htm?key=eeprom
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the