Add USB to your product in 10 minutes.
David VanHorn email (remove spam text)
At 03:16 PM 11/23/01 +1100, Don McKenzie wrote:
>Josh Koffman wrote:
> > Are these chips bus powered? Do they provide a means to power your
> > project from the bus too?
>Basically yes, and yes.
>I don't have the specs in front of me Josh, but looking at the general
>power info in Jan Axelson's "USB Compete Book" a device requiring 100 ma
>is fine, something that needs 500ma will depend on the PC power supply,
>ie: is it a notebook?, and if it is a hub, is it self powered?
Half an amp is all you get, from a powered hub.
I don't know the number for an unpowered one.
Dave's Engineering Page: http://www.dvanhorn.org
Got a need to read Bar codes? http://www.barcodechip.com
Bi-directional read of UPC-A, UPC-E, EAN-8, EAN-13, JAN, and Bookland, with
two or five digit supplemental codes, in an 8 pin chip, with NO external parts.
http://www.piclist.com hint: To leave the PICList
In reply to: <3BFDCDB5.E4F413F3@dontronics.com>
See also: www.piclist.com/techref/index.htm?key=add+usb+your+product
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the