piclist 2001\10\26\094002a >
Thread: preferred modern I/O
www.piclist.com/techref/microchip/ios.htm?key=i%2Fo
flavicon
face BY : Kathy Quinlan email (remove spam text)



Hi Doug,

I would say Ethernet or USB, depends on what data rates etc, I have helped
in the design at work using 10Mbit, but would hate to design 100Mbit (the
crystal Lan chip does not go that high, and even then we had a FPGA in
between the Uc and the Lan chip) USB is supported under UNIX and Windows (ok
unless you need to use dos, as I am not sure of a dos based driver)

RS 232 seems to be dead, more and more is moving to USB and Firewire, I am
having trouble finding laptops with one RS 232 port :o( another option is to
use the PS2 port to communicate with the PIC and then use Ethernet to
communicate with the other PC ?

Regards,

Kat.
____________________________________________________________________________
/"\   ASCII Ribbon Campaign  |        K.A.Q. Electronics
\ / - NO HTML/RTF in e-mail | Software and Electronic Engineering
X  - NO Word docs in e-mail  |      Perth Western Australia
/ \                                            |        Ph +61 419 923 731
____________________________________________________________________________


{Original Message removed}
<00d501c15e23$e6eea3b0$fe00a8c0@wskatinka> 7bit

See also: www.piclist.com/techref/microchip/ios.htm?key=i%2Fo
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) preferred modern I/O

month overview.

new search...