2 X 3VDC bat with PIC
On Thu, 23 Aug 2001 11:42:39 -0500, you wrote:
>How well does a PIC rated at 5.5VDC work with a little over 6 VDC on them?
>I can use a diode to drop it down (0.7vdc) a little, but I want it to
>operate over as much of the batteries life as possible.
>Any suggestions or experience on this?
>A low fallout on the PICs may be acceptable.
If you're talking coin cells, think about using 3 x alkalines instead
of 2x lithiums - LR44's etc. are extremely cheap if you know where to
go (<10 cents).
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email mitvma.mit.edu with SET PICList DIGEST in the body listserv
In reply to: <F49xDEA2VqFnW0kKIBX000014fa@hotmail.com>
See also: www.piclist.com/techref/microchip/devices.htm?key=pic
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the