piclist 2001\07\31\182945a >
Thread: How to print words on enclosure box?
face BY : Mike Kendall email (remove spam text)

Years ago, I built a communications van and used the Brother labeling
machine to label stuff.  I was working around the clock and didn't have much
time to mess around.  A few months later they began curling off.  Apparantly
the labels do not always stick all that well to metal.
A tried and true method I've discovered to keep quick labels from unsticking
is to put a light coat of super glue (cyanocrylate) on the back of the
label.  If you have a painted surface it will literally chemically weld
itself on it.  I cannot remember if I used this trick or not on the Brother
label machine but have done it with the older plastic label guns.
{Original Message removed}
<00a601c119e6$f6519a00$0101a8c0@pavilion> 7bit

See also: www.piclist.com/techref/index.htm?key=how+print+words
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) How to print words on enclosure box?

month overview.

new search...