piclist 2001\07\14\052030a >
Thread: removing numbers from chips
face BY : mike@whitewing.co.uk

On Sat, 14 Jul 2001 00:47:01 +1000, you wrote:

>> >I would like to hear what other PIClisters use to protect their designs.
>One technique that appeals to me is encapsulation
>in a plastic resin or epoxy;
Waste of time - normal epoxy is easy to remove with minimal damage -
unless you find something exotic (i.e expensive) that's hard to
remove, don't think potting will give you anything else but
environmental protection!
{Quote hidden}

>* mount the smt chip(s) direct on the board, with a
>big blob of epoxy over it.
Easily dissolved

http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv.....spamKILLspammitvma.mit.edu with SET PICList DIGEST in the body

<4gduktg91cb18h5nqhgpm9uqbfie6t4e5j@4ax.com> quoted-printable

In reply to: <3B4F09E5.2FEA@ezy.net.au>
See also: www.piclist.com/techref/index.htm?key=removing+numbers
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) removing numbers from chips

month overview.

new search...