piclist 2001\06\12\021130a >
Thread: Programming 16C54's with the Pocket
www.piclist.com/techref/ubicom/devprogs.htm?key=sx
flavicon
face BY : Dan Larson email (remove spam text)



Forgive the heresy, but the AVRs which use either low or high voltage
serial programming would be a breeze too. They are essentially programmed
through an SPI interface, save for the exception of the state of MCLR.
Newer AVRs will support JTAG.

Dan

On Mon, 11 Jun 2001 22:14:26 -0700, James Newton. Admin 3 wrote:

>SX's are NOT parallel programmed. They are programmed from only two data
>lines (connected to OSC1 and 2). The pocket could easily be extended to
>support SXs. All the required information is at the sxlist.com site. And I
>will pay $100 etc... to the first person who does it.
>
>James Newton, PICList Admin #3
>EraseMEjamesnewtonspam_OUTspampiclist.com
>1-619-652-0593 phone
>http://www.piclist.com
>
>{Original Message removed}

seeking: ubicom devprogs sx
<200106120558.AAA21036@citycenter.citilink.com> 7bit

See also: www.piclist.com/techref/ubicom/devprogs.htm?key=sx
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) Programming 16C54's with the Pocket

month overview.

new search...