Help! Single side mixer CMOS
Mike Hardwick email (remove spam text)
The standard approach is to create SSB at a more manageable (much lower)
frequency, then heterodyne it up to the final frequency. There must be an
RF/microwave discussion group somewhere...
>Thank you for your mail. There is no problem with filtering. However, in
>this case since the frequency is too close (10GHz and 10.5GHz), they are not
>too far apart, so if I filter the one, the filteration of the other is
>automatic! Any hints?! (other method would probably do the trick...)
http://www.piclist.com hint: The PICList is archived three different
ways. See http://www.piclist.com/#archives for details.
In reply to: <004f01c0e4e3$c5589580$e0be1fc4@n9c7o2>
See also: www.piclist.com/techref/index.htm?key=help+single+side
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the