Solder bridging on low volume PCBs acceptable?
Michael Rigby-Jones email (remove spam text)
Generaly unacceptable. If you are getting your boards stuffed externaly,
then part of the contract should be full visual inpsection. Without any
electronic board testing, you might get the odd one that slips through the
net with a couple of pins shorted, but it sounds like your assemblers visual
inpsection is sadly lacking.
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics
See also: www.piclist.com/techref/pcbs.htm?key=pcb
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the