Xtal capacitor values
David VanHorn email (remove spam text)
At 03:43 PM 4/5/01 -0300, Edson Brusque wrote:
> I have a board where the PIC (16F877) isn't starting (booting).
>Sometimes, when I plug it it starts and works ok, but then I reset and it
>doesn't work again.
> Raising or lowering the xtal capacitors values could help? Xtal is
>20MHz, capacitors 33pF, also tried with 22pF and with no caps, same result.
Allow me to refer you to my page on Xtals:
It sounds like you have a power or bypass problem as well, but if you're
guessing cap values, this is worth a read-thru.
Dave's Engineering Page: http://www.dvanhorn.org
Where's dave? http://www.findu.com/cgi-bin/find.cgi?kc6ete-9
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email mitvma.mit.edu with SET PICList DIGEST in the body listserv
In reply to: <008101c0be00$711d58c0$1858b0c8@brusque>
See also: www.piclist.com/techref/microchip/time.htm?key=xtal
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the