MAX 712/13 Battery charger
Attila Muhi email (remove spam text)
I am using that chip in an application. But I get too little difference between trickle charge and fast charge. Everything is set up correctly according to the data sheet. I use 2 groups of 4 cells in parallell. Do you have any experience of that ?
Attila - SM4RAN
Från: Steve Bergerson <OPTONLINE.NET> dberger
Till: MITVMA.MIT.EDU < PICLISTMITVMA.MIT.EDU> PICLIST
Datum: den 7 mars 2001 02:53
Ämne: MAX 712/13 Battery charger
I just found a new chip. OK it's not new to all of you but it is really cool.
It is a one chip solution for a nicad/nimh battery charger. A few extra parts and you have a battery charger. I built a couple over the weekend. A 8 cell charger. A 6 cell charger. This chip will provide a fast charge for a period of time and then look for either the leveling off point for a end point or a voltage drop end point.
I was going to have a few proto boards built that would be universal. You add the components and jumpers to the design. If anyone is interested I will sell these if you want.
Not all heroes wear tights and a cape.
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email mitvma.mit.edu with SET PICList DIGEST in the body listserv
http://www.piclist.com hint: To leave the PICList
See also: www.piclist.com/techref/power/batterys.htm?key=battery
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the