Attila Muhi email (remove spam text)
On other optic encoders, it can look like this: one pin is the reference signal. The signal on the other pin is different in phase, if the edge comes before the ref signal, the disc spins in one direction, if the edge comes after the reference signal, the disc spins in the other direction. I think that applies to mouse encoders as well.
Attila Muhi - SM4RAN
Från: Russell Farnhill <STOR-WAVE.CO.UK> r.farnhill
Till: MITVMA.MIT.EDU < PICLISTMITVMA.MIT.EDU> PICLIST
Datum: den 6 mars 2001 15:26
Ämne: [PIC]: Mouse encoders
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email mitvma.mit.edu with SET PICList DIGEST in the body listserv
See also: www.piclist.com/techref/microchip/ios.htm?key=encoder
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the