piclist 2001\02\21\112420a >
Thread: Using both capture inputs on PIC16F877
www.piclist.com/techref/microchip/ios.htm?key=input
flavicon
face BY : Dan Michaels email (remove spam text)



At 09:28 AM 2/21/01 -0500, you wrote:

>I must have messed up something because the signal input to RC1 is inverted and
>outputed on RCO even though TRISC is 0xFF. I did not output the signal to any
>pin.
>

Do you possibly have the T1OSC oscillator enabled?

Also, as indicated previously, it is generally "much" easier
if you first get these things running in polled I/O mode,
instead of interrupt mode. Fewer things to go wrong.

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads


<1.5.4.16.20010221090750.38ff2ab4@addr.com>

See also: www.piclist.com/techref/microchip/ios.htm?key=input
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) Using both capture inputs on PIC16F877

month overview.

new search...