piclist 2001\02\17\094922a >
Thread: Data on pager motors
www.piclist.com/techref/io/motors.htm?key=motors
flavicon
face BY : mikespamBeGone@whitewing.co.uk



On Fri, 16 Feb 2001 18:54:55 -0500, you wrote:

>Hi all,
>
>Does anyone know where I could get data (e.g. torque vs. speed vs. current
>graphs or at least a few points) for the tiny pager motors? Also, how easy
>it is (usually) to remove the weight from the shaft?
Weight removal is pretty easy. The important thing is NOT to apply any
force to the motor itself. Support the weight with a thin plate between the motor and weight, and
use a thin rod (e.g. dead 1mm PCB drill) and a hammer to punch the
shaft out of the weight

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics


<mdrs8tkmqes1qfl8ghdfsv7p2fqk27i4k2@4ax.com> quoted-printable

In reply to: <4.3.2.7.2.20010216185316.00bc7680@postoffice2.mail.cornell.edu>
See also: www.piclist.com/techref/io/motors.htm?key=motors
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) Data on pager motors

month overview.

new search...