piclist 2001\02\10\203730a >
Thread: Modify NOPPP to program SX28 chips?
www.piclist.com/techref/ubicom/devices.htm?key=sx28
face picon face BY : James Newton email (remove spam text)



www.sxlist.com/techref/scenix/devprogs.htm
Lists the SX programmers I know about.

Were I you, I would buy an SXKey and run it on a windows machine. The
debugging ability is just worth it.

The lowest cost option I know is the SX-Blitz from Parallax $79 and then use
the
http://sourceforge.net/projects/gsxprog/
software under Linux.

If you really want a "free" programmer and are willing to port some DOS C
code to Linux you might want to look at
http://www.codepuppies.com/~ben/sens/pic/sx/

See the PIC programming page at
www.piclist.com/techref/microchip/devprogs.htm
for some people who have ported DOS PIC programmers to Linux.
specifically, look at
http://www.piclist.com/techref/microchip/16F877/taitlinux.htm

If you do port the code, please consider posting the result for others.

James Newton
spamBeGonejamesnewtonSTOPspamspam.....sxlist.com
1-619-652-0593 phone
http://www.sxlist.com

{Original Message removed}
<000b01c093ca$4dfee080$b7840f18@escnd1.sdca.home.com> 7bit

See also: www.piclist.com/techref/ubicom/devices.htm?key=sx28
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) Modify NOPPP to program SX28 chips?

month overview.

new search...